www.vanco1.com
800.626.6445
8
REMOTE CONTROL
1. Standby button, press to turn on or off the unit, note
that the unit will not turn completely off, and will go into
standby mode
2. INPUTS: Select any input in order to send to any output
3. OUTPUTS: Select the desired output to send the input
signal to
4. Menu Buttons: ALL, EDID, CLEAR and ENTER
ALL:
Select all inputs/outputs, in order to send an input
to all outputs (splitting signal).
To send a single input to all outputs:
Example: Input 1 to all Outputs:
Press INPUT 1, then ALL, then ENTER
EDID MANAGEMENT BUTTON:
1. One input port learns the EDID data from a specific output
port.
Example: Input 2 learns EDID data from output 4:
Press EDID, then INPUT 2, then OUTPUT 4, then ENTER
2. All input ports learn EDID data from one specific output
port.
Example: All input ports learn EDID data from output 3:
Press EDID, then ALL, then OUTPUT 3, then ENTER
CLEAR:
Withdraw button
ENTER:
Confirm operation
