Vanco Evolution EVMX4K44, Manual

Page: 7 / 20

www.vanco1.com 800.626.6445 7
FRONT PANEL CONTROL
The front panel features four input selection buttons and four output selection buttons for manual switching:
1. To send one input signal to any single output:
Example Input 1 to Output 3
2. To send one input signal to multiple outputs:
Example: Input 2 to Output 3 and 4
Input/Output Switching
Press S1 + D3
Press S2 + D3 + D4
NOTE: Indicators of the pressed buttons will blink green for three times if the conversion is successful.
EDID
Extended Display Identification Data, the EDID adjustment helps with any compatibility issues by manually
selecting a combination of resolution and audio formats that the connected displays will accept.
The following table shows each combination based on the dip switch adjustments from 1-4, see rear side of
the EVMX4K44 for the EDID dip switches. Simply adjust to On or Off for all four switches.
To make and EDID adjustment, power off the EVMX4K44, adjust the dip switches, and then power on the unit
for changes to take effect. A successful adjustment will result in picture being displayed.
Switching Status Query
Press OUTPUTS button 1, 2, 3 or 4 to inquiry its corresponding input, and then the indicator of the input
button will turn green.
Dip Switch
Settings (1-4)
Video Format Audio Format
0 0 0 0 1080p LPCM
0 0 0 1 720p LPCM
0 0 1 0 3840x2160 LPCM
0 0 1 1 1080p Dolby DTS
0 1 0 0 3840x2160 Dolby DTS
0 1 0 1 4096x2160 Dolby DTS
0 1 1 0 3840x2160/60Hz LPCM
0 1 1 1 3840x2160/60Hz Dolby DTS
1 0 0 0 EDID PASS THROUGH
1 0 0 1 3840x2160/30Hz, HDR/
Dolby Vision LPCM
1 0 1 0 3840x2160/30Hz, HDR/
Dolby/DTS Dolby DTS