www.vanco1.com
800.626.6445
10
Controlled by single PC
1. Connect a computer to the TCP/IP port of the Matrix Switcher and set its network segment to the same
as the default IP of the Matrix Switcher (192.168.0.178).
2. Change the IP of the PC
Controlled by PC(s) in LAN
1. Connect the TCP/IP port of the Matrix Switcher to Ethernet port of PC using a Category (Cat5e/6) cable.
2. Set the PC’s network segment to the same as the Matrix Switcher. Record the PC’s original network
segment.
3. Set the Matrix Switcher’s network segment to the same as the router.
4. Set the PC’s network segment to the original segment.
5. Connect the Matrix Switcher and PC(s) to the router. In the same LAN, each PC should be able to control
the Matrix Switcher simultaneously.
The Matrix Switcher can be connected to a router or switch. This allows for the matrix unit to be controlled
over TCP/IP. When controlling the matrix unit with this method, ensure the network segment is the same as
the router. See below for connection diagram using this method:
