Van Der Stahl LOS NT Series, Operating Instructions Manual

Page: 42 / 64

[Essential tools] Scissors, Philips screwdriver, Alcohol
(Ethanol)
[Replace when] The heating element breaks often, the
seal becomes messy, etc.
1 Remove the fluoro glass sheet, heating element,
the temperature sensor and glass tape as
described in their respective replacement
instructions.
2 Completely remove the Sarcon sheet from under
the heating element.
3 Adhere the new Sarcon sheet so it covers the
both electrodes about 2mm.
LOS-NT/NTW series Operating Instructions Ver.6.02E
42
9-7 Sarcon sheet replacement (For
single-side heating type)
Caution
The damage to the Sarcon sheet
adhered under the heating element
will cause the insulation or sealing
failure. Please check the Sarcon
sheet as well when replacing the
heating element, and replace it if
necessary.
Attention
Applying the tape to a surface with
adhesive residues will negatively
affect the sealing surface.
Completely remove the residues
using alcohol (Ethanol) etc.
Sarcon sheet
Electrode
Seal length
About 2mm About 2mm