Van Der Stahl LOS NT Series, Operating Instructions Manual

Page: 39 / 64

[Essential tools] Industrial-purpose alcohol/ Ethanol
[Replace when] The surface of the silicone rubber
becomes uneven.
1
For double-side heating type, remove the fluoro
glass sheet, heating element, glass tape,
temperature sensor, etc.
2
Remove the damaged (old) silicone rubber, and
completely remove the adhesive residues using
an industrial-purpose alcohol (Ethanol).
3
Remove the paper of the new silicone rubber that
covers the adhesive tape. Adhere it starting from
the edge.
LOS-NT/NTW series Operating Instructions Ver.6.02E
39
9-4 Silicone rubber replacement
TIPS
Silicone rubber 600, 800, 1000 model :
textured
Over 1200 sealing length model : flat
Attention
Applying the new silicone rubber to
a surface with adhesive residues
will negatively affect the sealing
surface.
Attention
Please noted that the thickness of
the silicone rubber for the dual
heating type differs between
upper(2mm) and lower(1mm)
levers.
Silicone rubber
Adhere from the edge