VAMP 135
Over-, under-, residual voltage and
frequency relay
Operation and configuration
VAMP Ltd
26
VAMP 24h support phone : +358 (0)20 753 3264
VM135.EN008
6.
PC software
6.1.
PC user interface
The PC interface is intended to be used for on site
parameterization of the relay and for loading of the relay
software from a computer or reading of measured values to a
computer.
The RS 232 serial port is available for the connection of a local
PC on the front panel of the relay. To connect a PC to the serial
port use a connection cable of type VX 003.
6.1.1.
Using the VAMPSET program
See separate user’s manual for the VAMPSET software,
VMV.EN0xx. If the VAMPSET software is not available please
download it from www.vamp.fi.
6.2.
Remote control connections
The protection relay communicates with higher-level systems,
e.g. remote control systems, via the serial port (REMOTE) on
the rear panel of the relay.
Modbus, SPA bus, IEC 60870-5-103, Profibus or Modbus TCP
can be used as REMOTE communication protocols (see details
in Chapter 2.6.2. in technical description).
Additional operation instructions for various bus types are to
be found in their respective manual.