![background image](http://html1.mh-extra.com/html/vamp/50/50_operation-and-configuration-manual_3326818222.webp)
9.3 Protection stages
9 Technical data
Technical description
222
VAMP 24h support phone +358 (0)20 753 3264
VM50.EN004
9.3.2.
Frequent start protection
Frequent start protection N> (66)
Settings:
- Max motor starts
- Min time between motor starts
1 – 20
0.0 – 100 min. (step 0.1 min)
9.3.3.
Voltage protection
Single-phase overvoltage stages U>, U>> and U>>> (59) ***
Overvoltage setting range:
50 - 150 %U
n
(U>)
50 - 160 %U
n
(U>>, U>>>)
Definite time characteristic:
- operating time
0.08
**)
- 300.00 s (step 0.02) (U>, U>>)
0.06
**)
- 300.00 s (step 0.02) (U>>>)
Release delay
0.06 - 300.00 s (step 0.02) (U>)
Hysteresis
0.1 - 20.0% (step 0.1%) (U>)
Starting time
Typically 60 ms
Resetting time
<95 ms
Resetting ratio
0.97 (depends on the hysteresis setting)
Inaccuracy:
- starting
±3% of the set value
- operate time
±1% or ±30 ms
**) This is the instantaneous time i.e. the minimum total operational time including the fault
detection time and operation time of the trip contacts.
***) Only when measurement option is 1Line (line-to-line voltage) or 1Phase (phase-to-neutral
voltage). A complete three phase voltage protection is not possible with VAMP 52.
Single-phase undervoltage stages U<, U<< and U<<< (27) ***
Undervoltage setting range
20 - 120 %U
n
Definite time characteristic:
- operating time
0.08
**)
- 300.00 s (step 0.02) (U<)
0.06
**)
- 300.00 s (step 0.02) (U<<, U<<<)
Release delay
0.06 - 300.00 s (step 0.02) (U<)
Hysteresis
0.1 - 20.0% (step 0.1%) (U<)
Self-blocking value of the undervoltage
0 - 80 %U
n
Starting time
Typically 60 ms
Resetting time
<95 ms
Resetting ratio
1.03 (depends on the hysteresis setting)
Inaccuracy:
- starting
±3% of the set value
- operate time
±1% or ±30 ms
**) This is the instantaneous time i.e. the minimum total operational time including the fault
detection time and operation time of the trip contacts.
***) Only when measurement option is 1Line (line-to-line voltage) or 1Phase (phase-to-neutral
voltage). A complete three phase voltage protection is not possible with VAMP 52.