![background image](http://html1.mh-extra.com/html/vamp/50/50_operation-and-configuration-manual_3326818083.webp)
Technical description
2 Protection functions
2.16 Thermal overload protection T>
(49)
VM50.EN004
VAMP 24h support phone +358 (0)20 753 3264
83
Figure 2.16-2. Example of the thermal model behaviour.
Parameters of the thermal overload stage T> (49)
Parameter Value
Unit Description
Note
Status -
Blocked
Start
Trip
Current status of the stage
F
F
Time
hh:mm:ss
Estimated time to trip
SCntr
Cumulative
start
counter C
TCntr
Cumulative trip counter
C
Force Off
On
Force flag for status forcing
for test purposes. This is a
common flag for all stages
and output relays, too.
Automatically reset by a 5-
minute timeout.
Set
T
%
Calculated temperature
rise. Trip limit is 100 %.
F
MaxRMS
Arms
Measured current. Highest
of the three phases.
Imax
A
kxIn. Current corresponding
to the 100 % temperature
rise.
k> xImode
Allowed overload (service
factor)
Set
Alarm
%
Alarm
level
Set
tau
min
Thermal time constant
Set
ctau
xtau
Coefficient for cooling time
constant. Default = 1.0
Set
kTamb
xImode
Ambient temperature
corrected max. allowed
continuous current