www.valuehobby.com/js-40.html
Step4. Install the servo onto the servo mounting
using the screws provide with the servo.
Step5. Install the pushrod connector to the servo
horn.
Step6. Locate the aileron pushrod (1.8 x 125mm)
and connect it to the second hole on the servo
horn.
Step7. Slide the push rod through the pushrod
connector and position the control horn on the
aileron.
Use a pen to mark the mounting holes for the
control horn.
Step8. Use the M2 x 12mm socket head screws and
the control backplate to install the control horn
onto the aileron.
Summary of Contents for screamer 40
Page 17: ...2016 07 11...
