Version 2019.1
www.valoya.com
+358 10 2350 300
9
LED DRIVER PLACEMENT EXAMPLES
Install LED drivers against a flat surface to ensure optimal heat dissipation and operational lifetime.
ELECTRICAL CONNECTION PROCEDURE
1) Connect all ethernet cables to the system. Note that the incoming internet connection must connect to the router
port
“eth0”.
2) Connect the LED driver to the LightDNA-8 luminaire.
3) Connect the LED driver, Ethernet Router and LightDNA µPC to the mains supply.
LED driver installed outside a growth
chamber
LED driver installed next to the luminaire
1
2
3
4
5
6
Internet
Ethernet
Switch
LightDNA µPC
Control PC
LightDNA-8
LED Driver
Earth required for safety!
Do not connect or disconnect the
luminaire from the LED driver with the
mains supply switched ON
Connect the
incoming internet
cable to port “eth0” of the
used Router.
Installation Instructions
