20
Firebox Installation
Burner Module Reinstallation
Note: If the circulating fan is to be installed it
should be done at this point before installing the
burner module. See instructions packaged with the
fan for details of the fan installation.
Reinstall the burner module using the 4 screws
removed previously.
Note:
The upper baf
e may be removed to gain more
room for the screwdriver to install the rear screws.
Leveling the
rebox in the hearth
The backside of each support leg has a leveling bolt. If
necessary, adjust the level of the
rebox in the hearth.
Leveling
bolt
Front View
Side View
Fret bracket
Leg
Leveling bolt
Back
Front
Leveling
bolt
Gas Line Connection and Fire Unit Testing
Connect the gas line to the burner module. Check
for leaks, purge the line, and test-
re the unit before
installing the window or proceeding with the remainder
of the install—see
Lighting Instructions
section.
Reinstall the Top Baf
e
(if removed)
Reinstall Burner
Module (4 screws)
Edge Fits into
Cleat at Back
Remove Top Baffle
(2 screws)
Remove Top Baffle (optional)
(to provide space for a screwdriver)
Edge fits into
Cleat at Back
of Firebox
Reinstall Top
Baffle (2 screws)
QUALIFIED
INSTALLER
Summary of Contents for Retrofire RF24XBN
Page 30: ......
