PROGRAMMING GUIDE – EXTREME DUTY TPMS
5
SmarTool Setup
These instructions are for
first use only
to setup the
SmarTool:
1.
In main menu scroll to “System Set” (Item 7/7)
2.
Press ENTER
3.
Set up units of measure, select “Set Unit” (C/PSI)
4.
Press ENTER
5.
Default settings are in BAR/Celsius (BC), to switch to
PSI/Fahrenheit (PF) use the up/down arrow
(
Figure 3
)
6.
Press ENTER to select (unit will beep to confirm)
7.
Press ESC to return to the Setting screen
8.
To set up the number of axles, select “Set Axle”
(
Figure 4
)
9.
Press ENTER
10.
Use up down arrow keys to select number of axles
11.
Press ENTER once (note: Screen doesn’t change)
12.
Press ESC twice to return to Main Menu
*Note:
If programming TempTrac, please refer to the
TempTrac Setup Guide
.
Figure 4
Figure 3
Setting
Set Unit
Set Axle
Current Unit: PF
Want to Set: BC
