Step 1
Step 2
Step 3
Linked repeater (RPT2) selection
Accessed repeater (RPT1) selection
(UR) call sign selection
Calling a CQ
Calling
a specific station
Push and hold PTT to transmit, release to receive.
In the same Area : CQCQCQ
(e.g. JG3YMK)
(e.g. IKOMA43)
To other Area : Repeater name
In the same Area : NOT USE
In the same Zone : Repeater name (e.g. NARA43)
To a different Zone : GW
Select the linked repeater.
Select the access repeater name.
(e.g. HIRANO43)
Select the UR call sign.
Push to enter the DR mode.
Rotate .
Rotate .
Rotate .
Push .
Push and hold
Push and hold
for 1 sec.
for 1 sec.
Displays the repeater
icon
RPT1 selection
RPT2 selection
UR call sign selection
Displays the repeater
icon
Displays the UR call
sign icon
Display flushes
To call CQ in the same
zone, or a different zone,
the settings are the same.
This is a way to copy the call record contents (“CALLER,”
“RXRPT1” and “RXRPT2”) into the call sign memory “UR” and
the repeater list “R-L” at the same time, or individually.
q
Enter the RX CAL (RX call sign) mode.
MENU
➪
RX CAL
q
Push
[MENU
]
to enter the Menu screen.
w
Rotate
[DIAL]
to select “RX CAL,”
e
then push
[ ]
(5).
• The RX call sign screen is displayed.
w
Rotate
[DIAL]
to select the desired record channel.
e
Push
[ ]
(5) several times to select the desired call sign
from CALLER, / (CALLER’s note), CALLED, RXRPT1 and
RXRPT2.
r
Push
[
u
]
(6) to enter the copy select mode.
• The copy select screen is displayed.
t
Rotate
[DIAL]
to select the desired call sign to be copied,
between “C ALL,” “C UR01”–“C UR60” and “C R-L.”
• The “C ALL” selection won’t appear when either the station call sign
memory or the repeater list has no blank channel.
C ALL
: Copy the caller call sign in “CALLER” into “UR” (station
call sign memory) and the repeater call sign in “RXRPT1”
/ “RXRPT2” into the repeater list. This selection won’t ap-
pear when either the station call sign memory or the re-
peater list has no blank channel.
C UR01–
C UR60
: Copy the caller call sign in “CALLER” into “UR” (station
call sign memory). This selection appears when entering
the copy select mode (step
r
) from only “CALLER.”
C R-L
: Copy the repeater call sign in “RXRPT1” / “RXRPT2” into
the repeater list. This selection appears when entering
the copy select mode (step
r
) from only “RXRPT1” or
“RXRPT2.”
y
Push
[ ]
(5) to copy the selected record’s contents into the
appropriate call sign memory or repeater list.
u
Push
[MENU
]
to return to the operating display.
Displays call record channel
Displays the CALLER’s call sign
q
Push
q
The previously selected screen
appears
w
e
Push
e
w
Rotate
■
Storing Received call sign (UR, RPT1 or RPT2)
A-6793-1EX
i80AD/E80D
DR mode operating guide
■
DR mode operation
NOTE:
• The access repeater scan is useful to find
an accessible repeater.
Start : Push and hold
for 1 sec.
Stop : Push once again.
• Group selection is available while selecting
UR call sign.
Group selection: Push
momentarily.
“GRP CQ” (CQCQCQ), “GRP RP” (Repeater
group) and “GRP UR” (UR call sign memo-
ries) momentarily appear in sequence.
A specific station can be selected, or “GRP UR”
in the group selection will appear, only when the
UR call sign memory has been programmed.
• The setting can be confirmed.
Confirmation: Push and hold
for 1sec.
Rotate
to display “UR,” “R1,” “R2,” “MY”
and “FRQ” in sequence.
Push and hold
for 1 sec. to toggle the
name display and call sign display.
Name display is available only for repeater call
signs that have programmed repeater names.
Push once again to exit the confirmation screen.
Erase the call record contents
• Select “CLEAR” in step
t
, then push [ ](5) to erase the
selected channel contents.
First, program a MY call sign (Instruction manual: p. 36), then set it to the current call sign position (p. 47).
Next program the repeater list (p. 40). After that, follow this guide to access a D-STAR repeater
The CS-80/880*
cloning
software
(free download software) is helpful for programming call signs or the
repeater list. (Icom Global Site http://www.icom.co.jp/world/index.html) *Cloning cable is required.
