PROGRAMMING GUIDE – EXTREME DUTY TPMS
14
STEP 4
STEP 4.1
STEP 4.2
1.
The cursor arrow should be next to the “Wireless”
option. (
Figure 19
)
2.
Press ENTER
3.
The SmarTool will begin transmitting the sensor ID
information stored on the hand-held to the Valor
CANbus transceiver. “Transmitting” will appear on
screen.
1.
Once the SmarTool has completed transmitting the
information to the Valor CANbus transceiver, the
screen will display “Succeed.” (
Figure 20
)
2.
If the SmarTool displays “Failed,” proceed to the
programming confirmation outlined in Step 5.
Figure 19
Clear ID
Wireless
Serial Port
Figure 20
Succeed
