INSTALLER’S GUIDE
Page 31
5.
Install the 12 loose coals as follows. The
underside of each coal is marked with a letter
‘A’ to ‘L’ and an arrow.
6.
The coals should be positioned so that the
arrows always point towards the back of the
firebox. When located into position the stem of
each arrow should be at 90° to the rear of the
firebox.
7.
Hold coal ‘A’ upright with the arrow
pointing to the top. Locate coal ‘A’ as shown
in figure 34.
8.
Locate coals ‘B’ to ‘E’ so
that they are firmly seated in
the valleys in the coal base
and front coal.
9.
Hold coal ‘B’ upright
with the arrow pointing to
the top. Locate coal ‘B’ as
shown in figure 35.
10.
Hold coal ‘C’ upright
with the arrow pointing to
the top. Locate coal ‘C’ as
shown in figure 36.
Figure 36. Second row “Coal C”
Figure 35. Second row “Coal B”
Figure 34.Front Row “Coal A”
