INSTALLER’S GUIDE
Page 45
Figure 62. Ceramic support bracket
removal.
Figure 61. Burner Attachment Points
Figure 60. Control slide &
button fixings
16.6
To Replace the Control Slide Button
1.
Remove the front surround – See section 16.4.
2.
Detach the slide button by removing two screws –
See figure 60.
3.
Replace in the reverse order.
16.7
To Remove the Burner Unit
1.
Remove the bottom front and fire front castings
and the front surround - See section 16.3.
2.
Remove the loose coals, the front coal and the
base coal.
3.
Support the inlet isolating elbow to avoid
straining the pipework and disconnect the appliance
from the elbow.
4.
Detach the burner unit from the
convection box by removing two
screws –See figure 61.
5.
Replace in the reverse order.
16.8
To Remove the Electronic
Ignition Generator
1.
Remove the bottom front and
fire front castings and the front
surround - See section 16.3.
2.
Remove the battery.
3.
Remove the burner unit – see
section 16.6.
4.
If lying the burner on its back,
unscrew and remove the two ceramic
support brackets from the top of the
burner unit. This will avoid damage to
the brackets and the work surface (see
figure 62)
5.
Remove the spark lead
6.
Unscrew the pipe clamp and two
support bracket screws. The generator
and its support bracket can now be
moved forward. Be careful not to