5.1.4
Appliances with Standard Front
Remove the Front Frame (See fig. 4)
Lift off the bottom louver unit. Detach the front
frame by unscrewing two screws at the top and one
screw near the bottom corners each side.
5.1.5
Remove the Vent Connection Unit
Detach the top front channel by removing two
screws and lifting clear. Detach the vent connection
unit from the top of the appliance case by removing
the screw at front. Slide the vent connection unit
back and lift clear (see fig.5).
Lift off Bottom Louver Unit
Remove 4 screws
Fig. 4 Front unit removal
(Standard Front Appliances)
Fig. 5 Vent connector removal
5.1.6
Appliances with Cast Front
Fit the Gas Control Knob
Place the spacer tube over the control valve shaft.
Fit the control knob over the shaft pushing it firmly
on as far as it will go (see fig. 6).
Fig. 6 Fitting Control Knob (Cast Front Appliances)
9
