5.4
ASSEMBLE FUEL BED
5.4.1
Install the ceramic rear wall at the back of the
firebox (see fig.11). The wall has “BASE” embossed
at the bottom. Make sure that the wall is behind the
metal channel at top of the firebox
5.4.2
Install the ceramic side walls.
The side walls are left and right handed. Rest the
bottom edges of the side walls on the firebox side
supports. Locate the top edges of the side walls in
the gaps between the edges of the top heat baffle
and the firebox sides. Slide the side walls fully back
to touch the rear wall (fig. 12).
5.4.3
Install the rear log in the two supports at rear of the
firebox. Make sure that the log is fully located in the
“V” forms of the supports (fig. 13).
Fig. 13 Rear log location
Fig. 11 Rear wall location
Fig. 12 Side wall location
12
