16.8 To remove the main burner injector.
(See figure 32).
1.
Remove the burner (See section 16.7).
2.
Remove the burner clamping screw (See figure
32).
3.
Unscrew the injector from the burner.
4.
Refit in the reverse order.
16.9 To remove the appliance from the fireplace.
1.
Remove the burner unit (See section 16.2).
2.
Slacken the hexagonal adjusters on the cable
retainers and unscrew the thumbscrews to release
the cables.
3.
Refit as described in the relevant installation
sections. Make sure gas soundness, sealing, spillage test and performance are
satisfactory.
Page 33
©
Baxi Heating U.K. Limited 2007.
Figure 32. Main burner injector
removal
INSTALLER GUIDE
