To turn off.
!
To turn the main burner off but leave the
pilot alight, partially depress the knob and
turn to PILOT/IGN.
!
To turn the fire fully off, partially depress
the knob and turn to OFF.
!
Wait at least three minutes before
relighting.
!
While cooling, the fuel effect may make
some crackling noises. This is quite
normal.
CLEANING YOUR FIRE
To maintain the high performance and quality finish of your fire please follow these
guidelines:
!
Before attempting to clean the fire, please remember to turn off the fire and wait
for the appliance to cool completely.
The fire will retain heat for some time before
cleaning can begin.
!
If any pieces of debris are found in the hotbox, have the chimney inspected before
further use.
Fascia parts.
!
Clean the fascia parts with a slightly damp, lint free non-abrasive cloth and then
dry.
!
Do
not
use abrasive cleaners, as these will scratch the fire surface.
Ceramic fuel effect.
!
This product uses fuel effect pieces containing Refractory Ceramic Fibres
(RCF), which are man-made vitreous silicate fibres. Excessive exposure to this
material may cause irritation to eyes, skin and respiratory tract. Consequently,
it is important to take care when handling these articles to ensure that the
release of dust is kept to a minimum.
!
In the unlikely event of soot forming, light coatings will usually be burnt off during
the normal operation of the fire.
!
Should any soot accumulation become excessive, the fuel effect pieces should be
removed from the fire for cleaning.
!
Cleaning should be carried out in a well ventilated area or in the open air by
gently brushing with the pieces held away from your face so that you avoid inhaling
the dust.
Page 41
©
Baxi Heating U.K. Limited 2007.
OWNER GUIDE
Figure 4. Lighting with a taper
