MANURE CONTROL
TECHNICAN
’S MANUAL V0.
3
2020-02-19
27
9.2
Sequence
In the
TECHNICIAN ACCESS SEQUENCE
, you can change the start and stop of the sequence and
interlock sequence together.
9.2.1
Address of Start Command
In that box you can modified the condition to start the sequence.
Address:
Address of the PLC digital input.
Delay:
Delay that the condition needs to be true to
start the sequence.
Type:
Normally open or normally closed contact.
Equipment
: Programmed level sensor.
Start by Level %:
level setpoint.
HIGH/LOW:
The actual level must be higher than the setpoint.
The actual level must be lower than the setpoint.
