background image

3

© Vallox Oy - All rights reserved

MANU

AL

Replacing the lamp

•  Remove the protective glass of the lamp by moving it 

to the left (Figure 3).

•  Remove the lamp by pulling it to the left (Figure 4).

•  Lamp type: G23 LED.

Removing and mounting the grease 

filter

INSTALLATION

Use the mounting accessories included in the package 

to fasten the cooker hood in place.

1.   Shorten the extract air duct to be connected to the 

hood (125 mm spiral duct) to the correct length.

2.  Where required, install a Vallox cover strip, for 

instance, (2142400 cover strip 500 or 2142500 

cover strip 600) to cover the opening in the rear 

wall.

3.  Lift the hood so that it is in contact with the duct.
4.  Fasten the cooker hood with the mounting 

brackets or by other means, so that the hood is 

firmly in place and cannot move (figures 1, 2 and 

3). The mounting screws included in the accessory 

bag are suited to walls made of wood, chipboard, 

cement or stone. Use appropriate mounting 

devices for other materials.

5.  Check the tightness of the extract air duct system.
6.  Plug the cooker hood into the mains. Ensure that 

the plug can be unplugged, where required.

•  Open the quick connectors of the bottom plate of 

the cooker hood by turning (Figure 1).

•  Turn the bottom plate down.

•  Remove the grease filter from its holder (Figure 2).

1

2

3

4

1

2

4

min. 500 mm /  

 

650 mm

3

Electrical connection

WARNING

A G23 PL lamp will cause damage!

CAUTION

The minimum distance of the 

bottom edge of the grease filter to 

an electric cooker is 500 mm, and 

to a gas cooker 650 mm.

CAUTION

•  The cooker hood must not 

be connected to a flue that is 

used for removing combustion 

gases (e.g. from a wood- or 

gas-burning fireplace, cooker, 

or stove).

•  The cooker hood must not 

be fastened through the side 

panels to the cabinets.

•  Fans that are controlled 

through the cooker hood must 

have an engine cover and 

their maximum power must not 

exceed 340 W.

•  Regulations on leading 

extraction air outdoors must 

be observed.

POWER PLUG

Timer switch

 

Max 4A 250V

TIMER SWITCH

Damper closed

Damper open

Reviews: