background image

-  11  -

PROBLEMS, CAUSES AND SOLUTIONS

PROBLEMS

CAUSES

SOLUTIONS

The electric appliance 

does not start

The supply line is disconnected

Verify the electric power supply

The appliance is unplugged

Plug in the appliance and press the switch on button

Button not pressed

Press both levers to switch the appliance on

Old engine brushes (not visible 

externally)

Ask an authorized centre for assistance

Electric malfunction

Ask an authorized centre for assistance

Blade is stuck

Switch the appliance off, unplug it and remove the 

foreign body from the blade 

The appliance doesn’t 

cut well

Damaged blade or blade without 

teeth

Ask an authorized centre for assistance

The electric appliance 

vibrates too much

Damaged blade or blade without 

teeth

Ask an authorized centre for assistance

The branch of the hedge are too big 

or the wood is too hard

Do not keep cutting and use a tool with appropriate 

features

!

!

WARNING! If the power tool still fails to operate correctly after you have carried out the above operations, or in the 

event of anomalies other than those described above, take it to an authorised service centre with proof of purchase and 

ask for original spare parts. Always refer to the information shown on the technical specifications label.

STORAGE

Clean the tool and all its accessories thoroughly 

(see Maintenance section). Protect the unpainted 

parts with protective oil and use the original 

packaging and the blade sleeve to protect it. 

Keep the tool out of reach of children, in a stable 

and safe position. The place must be dry, free 

from dust, temperate and protected from direct 

sunlight.

Keep children and unauthorised personnel out 

of the storage room.

DISPOSAL

In order to protect the environment, proceed 

according to the local laws in force. Contact the 

relevant authorities for more information. When 

the machine is no longer usable or repairable, 

take the machine and its packaging to a recycling 

centre.

 Electric and electronic waste may contain 

potentially hazardous substances for the 

environment and human health: they should not, 

therefore, be disposed of along with domestic 

waste but be taken to specific centres for 

differentiated refuse collection or returned to the 

vendor in the event of purchasing a new, identical 

appliance. Illegal disposal of waste will result in 

administrative sanctions.

WARRANTY

The product is protected by law against non-

compliance with the declared characteristics 

provided it is used only in the manner described 

in the instructions, it has not been tampered with 

in any way, it has been stored properly, has been 

repaired by authorized and, where applicable, 

have been used only original spare parts.

In the case of industrial or professional use or 

when using such a guarantee is valid for 12 

months.

To issue a claim under warranty you must 

present proof of purchase to your dealer or 

authorized service center.

Summary of Contents for TS50FG













Reviews: