- 18 -
g
SYMBOLS
Carefully observe the symbols in
Fig. B
and
memorise their respective meanings. Correct
interpretation of the symbols allows a safer use
of the machine.
1. Manufacturing batch number of the machine
2. Product model and code
3. Technical data
4. Engine data
5. Fasten the front hand grip beyond the limit
arrow
6. Fuel
7. Stopping the engine
8. Air valve (starter)
kW kiloWatt
Hp horsepower
mm millimetres
cm centimetres
m metres
min
-1
revolutions per minute
s seconds
l litres
kg kilograms
dB decibel
___________________________________
Thank you for choosing our machine. Hereinafter
it will be referred to as “internal combustion
brush cutter”.
!
!
WARNING! The internal combustion brush
cutter is ideal for mowing grass and trimming
small shrubs.
Any other use is prohibited.
This manual contains information deemed
necessary for proper use, knowledge and stan-
dard machine maintenance. They do not report
information on techniques for lawn maintenance.
The user will find more information in books and
specialised publications or by attending courses.
COMPONENTS
Refer to
Fig. A
and the following:
1. Rear handle and controls group
2. Switch off the engine
3. Carburettor gas control lever (accelerator)
4. Accelerator safety lock
5. Carburettor priming pump
6. Internal combustion engine
7. Air control lever
8. Starter handle
9. Air Filter
10. Candle
11. Fuel cap
12. Front hand grip
13. Cutting head
14. Guard
15. Line cutter
16. Element of mowing
17. Fuel tank
18. Support/drive shaft
19. Backpack with motor support
20. Waist bag for accessories
21. Sheath with flexible cable transmission
23. Muffler
24. Racing Controller accelerator
25. Greasing fitting
26. Clip quick release
