- 8 -
g
!
Before using this product read all the
enclosed safety instructions and instructions
for use.
CONNECTION TO THE ELECTRIC POWER SUPPLY
IMPORTANT! Always check that the cable and
the plug are not damaged. Do not use the pump
if the cable is damaged!
If the power cable is damaged, it must be re-
placed by the manufacturer, support service or
qualified staff in order to prevent any danger.
The electrical connection must be done by an
electrician.
Connect the pump to a 230V~50Hz socket
which must be equipped with an efficient
earthed contact.
Check that the electrical system socket is
efficient and that it has a protection device
for over currents of at least 6A.
!
IMPORTANT! Only use the pump with a
circuit breaker switch (differential) with an
activation current of less than 30 mA. Consult
your local electrician.
MACHINE DESCRIPTION (FIG.A)
1. Pump body
2. Motor body
3. Liquid suction
4. Liquid delivery
5. Water cap
6. Power supply cable
7. Technical data label
8. Cut for impeller release
MACHINE MARKS (FIG. B)
Carefully observe the symbols in Fig.B and
memorise their respective meanings.
Correct interpretation of the symbols allows
safer use of the machine.
1 Machine model.
2 Technical data.
3 Batch number.
4 Certification mark
5 Electric and electronic waste may contain
potentially hazardous substances for the
environment and human health. It should
therefore not be disposed of with dome-
stic waste, but by means of differentiated
collection at specific centres or returned to
the vendor in the event of purchasing a new
identical appliance. Illegal disposal of waste
will result in administrative sanctions.
6 Noise levels
7 Safety symbols
V
Volt
Hz
Hertz
~
Alternating current
A
Ampere
W
Watt
kg
Kilograms
mm
Millimetres
s
Seconds
h
Hours
dB
Decibel
