background image

11

TECHNICAL DATA

Maximum lifting capacity 

2,000 kg

Minimum height (completely closed)   155 mm

Maximum height (completely extended)  320 mm

CHECK

Upon delivery, check the jack is perfectly intact. 

Any complaints must be reported to the supplier 

immediately.

The hydraulic jack, already complete with its oil, 

is supplied in strong cardboard boxes suitable 

for transport and storage. When storing it is 

recommended not to place any weights or other 

boxes on top of it.

SAFETY REGULATIONS

!

!

 TAKE NOTE OF THE HAZARD SIGN REFER-

RED TO IN THESE INSTRUCTIONS. IT INDICATES 

PARTICULARLY HAZARDOUS SITUATIONS.

!

!

 When using equipment for lifting weights, 

appropriate safety precautions must be taken to 

reduce the risk of falling, crushing and injuries. 

before using the jack carefully read and memo-

rise the safety regulations. after reading it, keep 

these instructions safe so that they stay with the 

jack for its entire useful lifetime.

!

!

 Do not tamper with the safety valve (11 

fig.A) in any way. Do not open the cap covering 

the valve. Any adjustment or tampering with 

the valve changes the safety characteristics of 

the product, causes danger and immediately 

invalidates the warranty.

- Wear suitable personal protective equipment 

(shoes, gloves…)

- Keep the work area clean and tidy. Dirty and 

messy areas can cause accidents.

- The machine must not be used in extreme 

weather conditions, inside freezers or furnaces 

or in the presence of strong magnetic fields.

- It must not be used in potentially explosive and 

aggressive atmospheres, mines, work sites, or 

in areas where there is vehicle and foot traffic.

- Lifting people, animals, liquids and potentially 

hazardous materials is not allowed.

- Before starting work, check that the equipment 

is perfectly intact, that there are no damaged 

or broken elements and that the manoeuvring 

lever has been correctly inserted in its housing 

(Fig. C). Any damaged or broken parts must be 

repaired or replaced by qualified and authorised 

personnel. Repairing or having repairs done by 

personnel not authorised by the Manufacturer 

means operating with unsafe and potentially 

hazardous equipment, as well as invalidating 

the warranty.

- While using the jack do not remove the guards 

and do not put hands or feet between the lifting 

saddle and the load to be lifted.

- During operations monitor the jack and the load.

- It is absolutely forbidden for children, strangers, 

inexperienced people or people who are not in 

good health to touch or use the jack.

- Use the jack on flat, compact surfaces that can 

support the weight of the jack and the load itself.

!

!

 Before lifting a vehicle it is compulsory to 

engage the parking brake and lock the wheels 

which remain on the ground with the brake 

blocks. Also carefully read the instructions of 

the vehicle that you need to lift.

!

!

After lifting the load, it is mandatory to insert 

appropriate safety trestles under it to prevent 

the load falling and becoming unstable.

- For your safety, do not operate under the load.

- Do not use the jack to keep the load raised, 

but only to lift and lower the load.

- Do not use the load to lift unstable loads and/or 

loads over its capacity (see “Technical data”).

- Should the jack accidentally fall, check that it is 

intact.

- Do not expose the jack to rain or bad weather 

and do not use it in damp or wet environments.

- While using the jack do not let any children, 

strangers or animals near the work area.

- After working carefully clean the jack and put 

it back in a dry environment out of the reach of 

children.

- Only operate with good lighting, in a safe position 

away from obstacles.

- Do not change the original configuration and do 

not remove any components.

!

!

 Take care handling the oil. Keep children, 

animals and heat sources at a distance. In case 

of accidental contact with skin and eyes, wash 

with plenty of water and if necessary seek me-

dical attention straight away; if accidently swal-

lowed, seek medical attention straight away.

Summary of Contents for 1650530

















Reviews: