© 2000 Directed Electronics, Inc.
23
plug-in program switch
The Program switch plugs into the blue two-pin connector.
tach learning
To learn the tach signal:
1.
Start the vehicle with the key.
2.
Within 5 seconds, press and
HOLD
the Program switch.
3.
The LED will light constant when the tach signal is learned. If the LED does not light bright
red, the unit did not learn the tach signal. (Refer to
Finding the Tachometer Wire
in the
Finding the Wires You Need
section of this guide.)
4.
Release the Program switch.
DRW-96
