© 2000 Directed Electronics, Inc.
11
remote start harness (H2) wiring diagram
______
______
______
______
______
______
primary harness (H1) wire connection guide
Remove any paint and connect this wire to bare metal, preferably with a factory bolt rather than your own screw.
(Screws tend to either strip or loosen with time.) We recommend grounding all your components to the same
point in the vehicle.
Sending a negative pulse to the H1/2 WHITE/BLUE (-) activation input wire will initiate the remote start
sequence. The H1/2 WHITE/BLUE wire can be connected to an auxiliary channel output of a security system or
H1/2 WHITE/BLUE (-) activation input
H1/1 BLACK (-) chassis ground connection
BLACK/WHITE
(-) NEUTRAL SAFETY SWITCH INPUT
VIOLET/WHITE
TACHOMETER INPUT WIRE
BROWN
(+) BRAKE SWITCH SHUTDOWN WIRE
GRAY
(-) HOOD PINSWITCH SHUTDOWN WIRE
BLUE/BLACK
(-) 200 mA THIRD IGNITION OUTPUT
BLUE
(-) 200 mA STATUS/FACTORY SECURITY REARM OUTPUT
H2/1
H2/2
H2/3
H2/4
H2/5
H2/6
