Проверил: Р.Ч./24.03.2015г
6. Starting the engine
Do not operate the machine in a closed or poorly ventilated areas as the exhaust gas contain poisonous
substance. Keep hands, feet, hair and clothing away from all the moving parts of the machine. The exhaust and
other parts of the machine will become hot during use. Make sure that the blade is securely fastened before
starting the engine.
NOTE:
To start the engine, make sure that the spark plug cap is located on the spark plug and the machine is filled with
sufficient oil and petrol.
Step1: Throttle lever-Starting
For starting a cold engine, move the throttle
lever to the START position (Fig.e1). When operation for 5~10 seconds, the
throttle lever is back to RUN position (Fig.e2). For starting a warm engine, move the throttle level also to the START
position;
Step2: Bail arm closed
Lift the starting bail arm lever towards the upper handle (Fig.e3);
Step3: Pull cord handle
Slowly but firmly pull the engine pull cord and rope out until you feel resistance. Let the rope recoil, then pull briskly (Fig.e4).
If the engine fails to start after 2-4 pulls, repeat the start process. When the engine starts, return the starter rope gently.
7. Adjusting the cutting height
Fig.e1
Fig.e2
Fig.e3
Fig.e4
Fig.f1
Fig.f2
