Valeport rapidPro CTD, Operating Manual

Page: 24 / 36

© 2019 Valeport Ltd
0660907a - rapidPro Operating Manual
Page 24
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Radio Frequency Exposure
The OEM Serial Port Adapter contains a small radio transmitter and receiver. During communication with other
Bluetooth products the OEM Serial Port Adapter receives and transmits radio frequency (RF) electromagnetic fields
(microwaves) in the frequency range 2400 to 2500 MHz. The output power of the radio transmitter is very low.
When using the OEM Serial Port Adapter, you will be exposed to some of the transmitted RF energy. This
exposure is well below the prescribed limits in all national and international RF safety standards and regulations.
Potentially Explosive Atmospheres
Turn off your electronic device before entering an area with potentially explosive atmosphere. It is rare, but your
electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling
areas, such as petrol station, below deck on boats, fuel or chemical transfer or storage facilities, and areas where
the air contains chemicals or particles, such as grain, dust, or metal powders.
3.1.1. Compliance with RoHS Directive
The ODIN-W2 series modules comply with the "Directive 2011/65/EU of the European Parliament and the Council
on the Restriction of Use of certain Hazardous Substances in Electrical and Electronic Equipment" (RoHS).
No natural rubbers, hygroscopic materials, or materials containing asbestos are employed.