Valeo Ekeon Comfort, Operating Instructions Manual

Page: 14 / 36

Eleon Roof Hatches Operation
10
5.2. Hatch with plastic cover - electrically operated
The operation of the hatch can be done with two switches or with a
control panel.
5.2.1. Operation using two switches
The following switch matrix shows the dependencies between switch
and hatch position.
Switch position 0 (contact open)
Switch position 1 (contact closed)
If the hatch is not closed, the roof position indicator light (if connected)
lights up.
5.2.2. Operation using the control panel
Button (select)
By pressing once, all existing hatches are selected. By pressing the SEL
key again, each hatch can be selected separately.
Buttons
Use these buttons to set the desired hatch position, the effect of the ac-
tion is limited to the selected hatches.
Red LEDs indicate the current position of the hatch cover.
Button (memory)
A scene can be stored by pressing the MEM (Memory) button for a
longer time.
In the case of short-term actuation, the last stored scene is activated.
Switch Roof hatch position
S1
(rear)
S2
(front)
closed at the rear
opened
at the rear
and at the
front
opened
at the front
opened
0 0 X
1 0 X
0 1 X
1 1 X
Bild 11: Control panel