Compa II series
Function menu
07.15 Operating
manual
57
Press key
to arrive the next menu item.
Indication of printhead temperature. The printhead temperature
corresponds normally to the room temperature. In case the maximum
printhead temperature is exceeded, the current print order is
interrupted and an error message appears at the printer display.
Press key
to arrive the next menu item.
This function is often used for high printing speed as the tearing of
transfer ribbon can be prevented.
The higher the '++' value is set, the slower the feeding motor is
accelerated.
The smaller the '
−−
' value is set, the faster the feeding motor is
decelerated.
Press key
to arrive the next menu item.
Settings:
Printout of all printer settings such as speed, label and
transfer ribbon material.
Bar codes:
Printout of all available bar code types.
Fonts:
Printout of all available font types.
Press key
to arrive the next menu item.
Indication of signal level which indicates the signal a print order is
started.
0 – Low
1 – High
Press key
to arrive the next menu item.
This function is activated e.g. if the transfer ribbon is to be changed. It
is avoided that a print order is processed although the module is not
ready. If the function is activated then press the key
to change
between Online and Offline mode. The respective state is indicated in
the display.
Standard: Off
Online:
Data can be received by interface. The keys of the foil
keyboard are only active, if you changed in the Offline mode with key
.
Offline:
The keys of the foil keyboard are still active but received data
are not processed. If the module is again in Online mode then new
print orders can be again received.
Printhead temperature
Motor Ramp
Print examples
Input/Output
Online / Offline
