Page 30
Owner’s Manual - SRF40
ENGLISH
2. Remove the front and rear burners held in place
by (2) screws using a powerdriver and a 5/16’’
hexagonal socket.
3. Remove burner base held in place by (2) screws
using a powerdriver and a 5/16’’ hexagonal socket.
HAND BEND
TAB INWARD
HAND BEND
TAB INWARD
4. Remove blowers brackets held in place by (6)
screws each, using a powerdriver and a 5/16’’
hexagonal socket.
5. Replace blower onto blower bracket. Bend
tab as shown and secure with (2) screws.
6. Remove protective connectors on Wire
Assembly from fireplace and discard. Connect
Wire Harness to both blowers and the other end
to the Wire Assembly supplied with the fireplace.
TO WIRE ASSEMBLY
(MODULE)
TO WIRE ASSEMBLY
(MODULE)
