Page 25
Owner’s Manual - SRF40
ENGLISH
5/16"
O
DETAIL O
A
DETAIL A
1
2
3. Locate the glass latch door tool (secured to the
top of the left side of the fireplace for shipping).
4. Use the Glass Latch Tool to grip the latch
bar and pry it over the Glass Frame hook
flanges.
5.
B
DETAIL B
Notice: The glass door is secured to the top of
the firebox with tabs that allow the glass door
to pivot outward at the bottom. The bottom
of the door frame engages into the four bullet
type retainers. Ensure that the latch tool is
completely hooked around the latch before
trying to disengage the clips. Glass clips are
tightly sprung. If the latch tool slips off of the
latch while pulling, injury may occur.
6.1 Glass cleaning
Clean the glass before use and two or three times each heating season. During start-up condensation
(which is normal) forms on the inside of the glass and causes lint, dust and other airborne particles to
cling to the glass surface. Also initial paint curing may deposit a slight film on the glass. Use a non-
abrasive household cleaner and warm water (we recommend gas fireplace glass cleaner).
WARNING
Clean glass with cleaner designed for fireplaces.
Do not use Ammonia based or abrasive cleaners on glass.
Do not attempt to clean glass when glass is hot.
