
8
1.3
Fireplace Installation
WARNING:
IN ORDER TO COMPLETE THE FIREPLACE INSTALLATION
AND DEPENDING ON THE TYPE OF FINISHING MATERIAL
USED, YOU MUST INSTALL ONE OF THE FOLLOWING TRIMS;
A NARROW OVERLAP (A) OR A MASONRY TRIM (B) (SOLD
SEPARATELY).
Note that if you install a masonry trim ane that the incombustible material is more than 3/8’’
thick, you will need to install it before installing your fireplace (see
Figure 16
.) To preform the
installation of the masonry trim, see Section 1.3.4.2.
Figure 1 (A)
Straight Narrow Overlap
Figure 1 (B)
Arched Narrow Overlap
Figure 1 (C)
Straight Masonry Trim
Figure 1 (D)
Arched Masonry Trim
CAUTION: WHEN USING THE DECORATIVE APPLIANCE, THE FIREPLACE
DAMPER MUST BE SET IN THE FULLY OPEN POSITION.
Summary of Contents for FP11 FRONTENAC
