Valcourt FP11 FRONTENAC, Installation And Operation Manual

Page: 29 / 64

29
1.3.8 Refractory Panels installation
1.3.8.1 Moulded Refractory Brick Panels (VA11071BR)
1. Remove the andirons (VA7070) by unscrewing the anchoring bolts (30109). Then
place the bottom refractory panels (22199 and 22207) at the bottom of the firebox and
pull them toward the front of the unit to help positionning the sides and back
refractory panels.
Step 1
.
2. Place the lower back refractory panel (22200). Set it on the floor of the firebox, behind
the bottom refractory panels.
Step 2
.
3. Place the left and right lower refractory panels (22201 and 22202). Set them on the
floor of the firebox, as shown.
Step 3
.
4. Adjust the joints of the refractory panels already set in the bottom and around the walls
of the firebox. Then lay the upper back refractory panel (22208) on top of the lower
back refractory panel.
Step 4
.
5. Place the upper left and right refractory panels (22209 and 22210) onto the notches of
the bottom left and right refractory panels (see detail A).
Step 5
.
6. Secure the upper refractory panels retainers (PL64601) (2x: 1 left and 1 right) using
the screws (30026) provided with the owner's manual kit.
Step 6
.
7. Reinstall the andirons (VA7070) and secure them with anchor bolts (30109).
Step 7
.