23
EN
Cleaning and maintenance
WARNING!
• Always unplug the unit and allow it to cool down
completely before cleaning it.
• Never immerse the steam station, cable or plug in
water or any other liquid, as they contain electrical
components. Do not rinse them under the tap.
NOTE:
Never use solvents, chemical or abrasive cleaning
products, wire brushes, sharp objects or scouring pads
to clean the unit.
• Empty the tank after each use. Avoid leaving water in the tank,
as this may lead to residue and limescale build-up.
• Wipe down the iron and steam station with a soft, damp cloth.
• To remove occasional lime deposits on the soleplate, rub them
with a cloth slightly dampened with water.
• Allow the unit to air dry or dry it with a soft, dry cloth before
putting it away.
• Place the iron on the steam station, then raise the
lock
to the
locked
position to secure the iron in place.
Troubleshooting guide
Use this troubleshooting guide to resolve any common problems that you may encounter with
the unit. If the problem persists, do not use the unit. Contact an authorised service centre to
have the unit examined or repaired.
Problem
Possible Cause
Solution
The iron is not
heating up.
• The unit is not plugged into
a mains socket.
• The unit went into
auto
shut-off mode (standby)
due to more than 10
minutes of inactivity.
• Plug the unit into a suitable mains
socket.
• To reactivate the unit, press the
steam burst button
.
Cleaning and maintenance
C
Summary of Contents for PERFECT-ST IDEAL-TEMP
Page 2: ...MAX...
Page 3: ...MAX MAX MAX MAX...
