VALBERG 971314, Instructions For Use Manual

Page: 10 / 150

7 EN
Using the appliance
B
• Your washing machine requires a mains power supply of 220-240 V, 50 Hz.
• The power cord of your washing machine is fitted with an earthed plug. This plug should always
be inserted into a 10 amp earthed outlet.
• This plug should always be inserted into a 10 amp earthed outlet. The fuse rating of the outlet
must also be 10 amps.
• If the plug or fuse does not meet these requirements, call a qualified electrician.
• We disclaim all liability for any damage resulting from the use of unearthed facilities.
NOTE
Using the machine at low voltage will shorten its
lifetime and it will not perform as well.
Connecting the water inlet hose
Œ
Depending on its technical specifications, your machine can be fitted with either a single
water inlet hose connection (cold water) or a double connection (hot and cold water). The hose
with a white cap should be connected to the cold water inlet and the hose with a red cap to the
hot water inlet (if applicable).
• To prevent water leaking from the joints, 1 or 2 nuts (depending on the technical specifications
of your machine) are delivered in the hose packaging. Fit these nuts to the end of the water
inlet pipe(s) to be connected to the water supply.
1
2
3
4