VALBERG 971314, Instructions For Use Manual

Page: 28 / 150

25 EN
Using the appliance
B
NOTE
The duration of the programs may vary depending on
the amount of laundry, the quality of the water, the
ambient temperature and the additional functions
selected.
(*) The washing water temperature for the program is the factory default temperature.
(**) 60°C - 40°C are energy label declaration programs
(***) As this program is shorter, we recommend that you use less washing product. This program may
last more than 15 minutes if the machine detects an unevenly distributed load. The machine door
will unlock 2 minutes after the end of the washing program. (These 2 minutes are not included in the
duration of the program).
• In accordance with regulations 1015/2010 and 1061/2010, program 3 and program 4 are
respectively the "standard 60°C cotton program" and the "standard 40°C cotton program".
• The Eco 40-60°C program is used to wash normally soiled cotton laundry in the same cycle,
whether it is washable at 40°C or 60°C. This program is used to assess compliance with European
ecodesign legislation.
• The most energy-efficient programs are usually those that work at lower temperatures over
longer periods of time.
• Respecting the manufacturer's recommended capacity for each program when loading the
household washing machine will help to save energy and water.
• The program duration, energy consumption and water consumption values may vary depending
on the weight and type of load to be washed, the additional functions selected, the quality of the
tap water and the room temperature.
• Use washing liquids for low temperature washing programs. The amount of washing product to
be used may vary depending on the amount of laundry and how dirty the laundry is. Follow the
washing product manufacturer's recommendations for the amount of washing product to use.
• The noise level and residual humidity depend on the spin speed. The higher the spin speed
during the spin phase, the louder the noise level and the lower the residual humidity level.
• You can access the product database where the model information is stored by scanning the QR
code on the energy label.