Installation Manual _________________________________________________________________
116 _________________________________________________________________ M210485EN-B
1
2
3
0011-044
Figure 102
Connecting a Radio Modem to a PC for
Configuration
1.
Disconnect the radio modem from outdoors, if already installed,
and place it near the MIDAS IV PC.
2.
Shut all MIDAS IV programs on the MIDAS IV PC, and when
applicable disconnect the MIDAS IV PC from the QCA101 unit.
3.
Connect the PC cable (number 2 in Figure 102 above) between
the PC and the radio modem, which has the data/power cable
(number 1 in Figure 102 above) connected.
NOTE
Do not connect the QMP211 power supply (number 3 in Figure 102
above) to the power supply connector at the PC end of the landline
cable (2), until the configuration software prompts you to supply
power to the radio modem.
4.
Click the
Radio Modem
button in the
TACMET
Configuration
Wizard
window to start the configuration
software.
5.
Enlarge the appearing window by pressing ALT+ENTER.
6.
Click the
OK
button.