Chapter 4 _________________________ Installation of the Weather Station Components to the Mast
VAISALA ______________________________________________________________________ 105
0306-051
Figure 91
Installing the Ceilometer to the Support
10.
Connect the DC/DATA cable to the connector
J1
on the
ceilometer and the other end to the correct connector on the
QMP202MP unit. Refer to Figure 92 below and section
Connecting Sensors to QMP202MP on page 107.
11.
Connect the AC (mains) cable to the connector
J2
on the
ceilometer and the other end to the correct connector on the
QMP202MP unit. Refer to Figure 92 below and section
Connecting Sensors to QMP202MP on page 107.
9904-026
Figure 92
Connectors on the CT25KAM Ceilometer
12.
Coil any excess slack of the cables and clamp them to the hooks
under the support.
13.
Attach the cables to the mast with the cable ties.
14.
Verify the installation as instructed in section Verification on
page 122.
