Vaisala RVP900, User Manual, Page: 428 / 484

Summary of
softplane.conf Status
and Control Bits
Description
sLocal
Antenna local mode indicator, usually tied to an external local/remote
switch.
sStandby
Radar ready to radiate indicator
sLowerEL Lower limit switch indicator
sUpperEL
Upper limit switch indicator
sTransmitPwr Transmitter cabinet power on indicator
sTransmitLocal Transmitter local mode indicator, usually tied to an external local/
remote switch.
sPWidth[3:0] Indicator of the current pulse width
sTrigBlank Indicator that trigger blanking is requested, usually from an external
source.
sRadiate Radiate on indicator
sAirflowFlt Cooling airflow fault indicator
sWavegpFlt
Wave guide pressure fault indicator
sInterlockFlt Master interlock fault indicator
sMagCurrentFlt
Transmitter overload fault indicator
sReset Request for reset coming from external source
sIrisMode[2:0] Information on which operating mode is active in the application
software
sAux[319:0] Arbitrary status indicators
• Each piece of hardware is identified as either in use or not in use.
splConfig.Io62[0].InUse = 1 if in use
splConfig.Io62[0].InUse = 0 if unused or not installed
• The I/O-62 is the only I/O device supported by the softplane.
RVP900 User Guide M211322EN-J
426