4. Using Indigo201 with Insight PC
software
4.1 Vaisala Insight PC software
Vaisala Insight PC software is a configuration software for Vaisala Indigo-compatible probes
and transmitters. Insight is available for the Windows operating system (64-bit only). For a full
list of supported operating system versions, see
http://www.vaisala.com/insight
.
To ensure support for your transmitter, download the latest version of Insight at
With the Insight PC software, you can:
• See real-time measurements and device and status information
• Configure outputs and relays
• Calibrate and adjust output
• Configure the transmitter settings (for example, display mode)
• Calibrate and adjust the probe connected to the transmitter
• Test and adjust the analog output channels of the transmitter
Indigo200 transmitters can be connected to Insight PC software with a standard USB-C cable
(type C to A or type C to C). For instructions on connecting the transmitter to Insight, see
Connecting to Insight PC software (page 23)
Note that the USB cable connection to Insight is only intended for temporary use
during configuration, and must not be used for permanent installations. The IP
rating and EMC properties of the transmitter can be affected when the USB port
is open.
To connect the Indigo transmitter to Vaisala Insight PC software with a USB cable,
you must have the Vaisala USB Device driver installed on your PC.
4.1.1 Installing Vaisala USB Device driver
The Vaisala USB Device driver only supports Windows
â
operating systems.
1. Connect your USB-C cable to the Indigo transmitter USB port, and the connect the USB
cable to a USB port on a PC that has Insight PC software installed. Windows
â
detects the
new device and installs the appropriate driver.
Chapter 4 – Using Indigo201 with Insight PC software
21
