Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 89
Example:
>fst on
Form. status : ON
>send
w 0 Tdf= 0.6 'C x= 4.0 g/kg SSR= 22.5 % Ts= 23.2
'C
>
N ... xxx = Normal operation where xxx = Probe heat power
H ... xxx = Purge
where xxx = Sensor temperature (ºC)
S
... xxx = Sensor cooling
after purge
where xxx = Sensor temperature (ºC)
A ... xxx = AutoCal
where xxx = Sensor temperature (ºC)
w ... xxx = Sensor warming
where xxx = Sensor heat power
General Settings
Changing Quantities and Units
To change quantities and units use serial commands or the optional
display/keypad. See Table 5 on page 20 for available quantities.
NOTE
Only the quantities selected when ordering the device can be selected as
an output quantity.
Using Display/Keypad
Use display/keypad to select the display output quantities.
1. Open
the
MAIN MENU
by pressing any of the
▲▼◄►
arrow
buttons.
2. Press
the
►
arrow button to select
Display
.
3. Press
►
arrow button to select
Quantities
.
4.
Select the quantity by using the
▲▼
arrow buttons. Confirm the
selection by pressing
SELECT
. You can select 1 ... 3 display
quantities at a time.
5. Press
EXIT
to return to the basic display.