21
Enable/Disable
“Settings mode”
- press the
[SCAN]
button 8 times (
MUST BE DONE
within 1-2 seconds)
.
You will hear a short beep.
The unit will not keep this mode in memory, after vehicle ignition is turned OFF and back ON, unit will return to normal
mode.
Settings Mode
MML controls
Activate / Deactivate “Disc Switching Fix” Function
@
Put your device in Settings Mode by rapidly pressing the [SCAN] button 8 times (MUST BE DONE within 1-2
seconds).
@
Push the DISC RANDOM button to hear a long beep to toggle the “Disc Switching Fix” Function ON and OFF.
(For vehicles not equipped with DISC RANDOM as a physical button, push and hold the RANDOM button until you hear a
long beep to toggle the “Disc Switching Fix” Function ON and OFF.
Activate / Deactivate “I Agree” Automatic Bypass Function
@
Put your device in Settings Mode by rapidly pressing the [SCAN] button 8 times (MUST BE DONE within 1-2
seconds).
@
Push the DISC REPEAT button to hear a long beep to toggle the “I Agree” Automatic Bypass Function ON and OFF.
(For vehicles not equipped with DISC REPEAT as a physical button, push and hold the REPEAT button until you hear a
long beep to toggle the “I Agree” Automatic Bypass Function ON and OFF.
IMPORTANT
i
(1) After a delay of five seconds, this product will automatically bypass the automobile
manufacturer's on-screen warnings concerning use of the onboard navigation system.
These warnings are: ”Caution, Drive safely and obey traffic rules. Watching this screen while
vehicle is in motion can lead to a serious accident. Make selections only while stopped. Some
map data may be incorrect. Read safety instructions in Navigation Manual.”
(2) PLEASE PRE-NOTIFY EVERY DRIVER OF THIS VEHICLE OF THE
CONTENT OF THE AUTOMOBILE MANUFACTURER'S WARNING.
(3) IF YOU PREFER THAT THIS PRODUCT NOT ELIMINATE THE FOREGOING
WARNINGS, YOU MAY DISABLE THIS FEATURE BY FOLLOWING THE
INSTRUCTIONS IN THIS OWNER'S MANUAL, OR REFER TO INSTRUCTIONS
AVAILABLE ON THE MANUFACTURER'S WEBSITE
.
WWW.VAISTECH.COM
Important Please Read!
!
!
“Disc switching Fix” has been designed to avoid a Radio malfunctioning in some vehicles while navigating through disc
selection. MML comes with this feature activated by default, and it can causes screen to go black for 0.5 sec -1.5 sec in
between disc selection. It doesn't have to be ON for all vehicles. Users are welcome to turn this feature OFF to determine
whether or not it actually needs to be ON or OFF for their vehicles.
For CD-MP3 Changer Emulation ONLY!
