Notes on the installation instructions
4
Installation instructions VRC 470 0020116690_00
1
1
Notes on the installation
instructions
The following instructions are intended to guide you
throughout the entire documentation. Further docu-
ments apply in combination with these installation
instructions.
We accept no liability for damage caused by failure to
observe these instructions.
1.1
Observing other applicable documents
>
Always observe all installation instructions for struc-
tural parts and components of the system when
installing the VRC 470 controller.
These installation instructions are enclosed with the var-
ious system components as well as additional compo-
nents.
>
Also observe all the operating instructions included
with the system components.
1.2 Document
storage
>
Pass these installation instructions and all other appli-
cable documents and, if necessary, any required tools
to the system operator.
The system operator will store these so that they are
available when required.
1.3 Symbols
used
The symbols used in the text are explained below: Sym-
bols for identifying dangers are also used in these oper-
ating instructions
(
¬
Section 2.1.1)
.
i
Symbol that denotes useful tips and
information
>
Symbol for a required action
1.4
Applicability of the instructions
These installation instructions are valid for units with
the following article numbers only:
Type designation
Article number
Countries
VRC 470
0020108130
GB
Tab. 1.1
Type designations and article numbers
The 10-digit article number can be found in the serial
number of your unit.
The serial number is displayed when you press the left
function key under "Information/Serial number". It is in
the second line of the display
(¬ Operating instruc-
tions)
.
CE label
The CE label documents that, based on the type over-
view, the units comply with the basic requirements of
the following directives:
– Electromagnetic compatibility directive (Council Direc-
tive 2004/108/EC)
– Low voltage directive (Council Directive 2006/95/EC).
1.5 Glossary
Technical terms are explained in the Glossary at the end
of these operating instructions.
