ESC Classic 50A
Electronic Speed
Controller
Dear customer,
Thanks for choosing LETON ESC (Electronic Speed Controller) for brushless motor. This is a user-friendly, easy to set
up, new developed speed controller for both fix wing & Helicopter. We have produced this product to be of the highest
quality, performance, and reliability at a “value-packed” price. We hope it provides you with hours of enjoyment.
We strongly recommend you
pay careful attention to the following instructions and warning
before you start
using LETON electronic speed controller.
Best wishes
Model: ESC Classic
50A
Connection Diagram:
Specifications:
Application Fields: fix wing & Helicopter
Battery range:
LI-XX = 2 ~ 4 cells;
7
.2V ~
14.4
V
NI-XX = 5 ~ 12 cells; 6.0V ~ 1
4
.4
V
Working Current: 50A /60 A Surge 15S
PWM frequency: 8 KHz
Maximum RPM: 2-pole motor / 210,000 rpm
6-pole motor / 70,000 rpm
12-pole motor / 35,000 rpm
Protection: OHP, Over Heat protection
OVP, Over Voltage (battery) Protection
LVP, Low Voltage Protection (soft cutoff)
BEC Current:
2
A
（
Max.
）
Ambient Temperature: 0
℃
- 50
℃
Weigh:
40
g
Size: 45 x30 x 15 (mm)
Features:
z
High rate 8 KHz switching (PWM); Supported
highest motor speed: 210000 RPM (2 poles), 70000
RPM (6 poles), 35000 RPM (12 poles)
z
Dynamic braking ensures prompt prop folding.
z
Over Heat Protection.(OHP)
z
User easily Programmable ESC Features by our ESC
Programming Card.
z
Low-voltage soft-cutoff protection, cause Throttle
going slow down.
z
Battery range protection, when the voltage of the
battery pack is lower/higher than the Battery range
threshold, the alarm status is activated.
z
Brake/No Brake operation. Stop folding props cold
— or let fixed props freewheel.
z
Safe “power on” arming program ensures motor will
not accidentally turn on.
z
Low torque “soft start” prevents damage to fragile
gearboxes.
z
Auto shut down in 2sec after when RX signal is lost
or radio interference becomes severe.
z
Throttle Range can be auto setting during at first
power on time.
z
ESC can make brushless motor play music when all
the setting is ready to go.
