8
Installation instructions for the VPS Buffer Cylinder 0020011995_04
Fig. 4.8 Fitting the insulating jackets
It makes sense to use two people when fitting the insu-
lating jackets.
• Remove the insulating jackets from the protective
film, taking care not to damage the insulating materi-
al.
• Wind the large (front) insulating jacket around the
buffer cylinder from the front, as shown in Fig. 4.8.
Fig. 4.9 Attaching the rear insulating jacket (from above)
• Attach the smaller (rear) insulating jacket to the cylin-
der from the rear, so that the sensor sleeves fit into
the openings on the jacket.
Abb. 4.10 Engaging the clamping strips
• Press the insulating jackets against the buffer cylinder
so that the clamping strips engage in one of the
catches.
Fig. 4.11 Fitting the top pad
• Lay the top pad on the cylinder and press it between
the insulating jackets so that it sits snugly.
4 Assembly
Summary of Contents for VPS 300
