Start-up/decommissioning
18
Installation instructions for the electronicVED exclusive electric instantaneous water heater 0020176440_00
5
5.4
Checking the system's functionality
a
Danger!
Risk of being scalded by hot water!
The outlet temperatures at the draw-off
points can be up to 60 °C. and can cause
scalding.
>
Set the scald protection function on your
electronicVED exclusive to a maximum of
43 °C if you want to be protected from
scalding.
>
Inform the operator that there is a risk of
scalding when the water temperature
exceeds 43 °C.
>
Using the display buttons, test the unit's output by trying
the running water at a draw-off point.
The water temperature on the electronicVED exclusive can
be set in increments of 0.5 °C.
-
+
Memo eco
°C
38,5
-
+
2
1
5.3 Output selector switch
>
Press the
+
button (
1
) or the
—
button (
2
) until the
required set target temperature is shown in the display.
5.5 Decommissioning
5.5.1 Temporary
decommissioning
The VED can be taken out of service temporarily, e.g. for
maintenance work.
>
De-energise the unit.
>
Close the cold water stop valve.
5.5.2 Permanent
decommissioning
To shut down the VED permanently, proceed as follows:
>
De-energise the unit.
>
Close the cold water stop valve.
>
Carefully loosen the cold and hot water connections.
>
Capture the residual water (up to 0.4 litres) left inside
the unit using a suitable container.
>
Remove the unit from its mounting.
