Installation instructions for the electronicVED exclusive electric instantaneous water heater 0020176440_00
5
a
Safety
a
2
>
Set the scald protection function on your electronicVED
exclusive to a maximum of 43 °C if you want to be pro-
tected from scalding.
>
Inform the operator that there is a risk of scalding when
the water temperature exceeds 43 °C.
Material damage inside the unit caused by poor
quality water
An electronicVED exclusive electric instantaneous water
heater must only be used to heat up drinking water. This
potable water must meet the specific German or Austrian
legal requirements for quality. Otherwise, it is not possible
to rule out the risk of corrosion inside the unit.
Material damage due to improper use and/or
unsuitable tools
Improper use and/or the use of unsuitable tools may result
in material damage (e.g. water leaks).
>
Always use a suitable open-end spanner to tighten or
undo threaded connections.
>
Do not use pipe wrenches, extensions, etc.
Risk of frost.
If an electronicVED exclusive electric instantaneous water
heater is placed out of operation for a relatively long period
of time in an unheated room in cold weather, the water in
the unit and pipes may freeze.
>
Install the electronicVED exclusive electric instantaneous
water heater in a permanently frost-free room.
>
Store the electronicVED exclusive electric instantaneous
water heater in a permanently frost-free area.
Material damage to the appliance caused by
changes
No changes must be made to the electronicVED exclusive.
>
Do not make any changes to the unit yourself.
>
Inform the operator that they must not make any
changes to the unit or to the electricity lines or water
pipes.
In the event of a fault
>
Read the "Detecting and rectifying faults" section to find
out what you must do in the case of fault.
>
Inform the operator that they must not attempt to repair
the unit under any circumstances.
>
Inform the operator that they must not remove the unit
cladding.
2.4
Standards and directives
Please observe the existing national rules and regulations,
standards, laws and guidelines.
2.5 CE
label
CE labelling shows that the electronicVED exclusive elec-
tric instantaneous water heaters comply with the basic
requirements of the following directives:
– Electromagnetic compatibility directive (Council Directive
2004/108/EC)
– Low voltage directive (Council Directive 2006/95/EC)
– Radio and telecommunications terminal equipment
directive
(Council Directive 1999/05/EC (Class 1))
